Pvr Mode; Instant Recording; Schedule Recording; Timeshift Mode - Kogan 7 EH7500 Series User Manual

PVR MODE

NOTE
• Don't connect or disconnect any USB device while in USB playback mode.
• Ensure all personal data is backed up before inserting USB device into TV.
We assume no liability for any loss of data due to malfunction or misuse.
• USB device should have capacity at least 512MB.
• USB device must support USB 2.0 high-speed specification.
• Use only USB storage devices formatted to FAT32.
• You cannot change channels while recording.
• If the signal is interrupted while recording, the recording will stop until signal is
regained.
• While in time-shift mode, do not turn TV off.
Recording
There are two types of recording: Instant Recording and Schedule Recording.
Instant recording can record current TV programmes, while schedule recording
can be set to record TV programmes automatically on the day, time, and
duration you choose.

Instant recording

Select the channel you want, then press the Record button on the remote
control to start recording. You will be prompted to confirm – press
begin recording.
To hide the information bar at the bottom of the screen, press the Record
once more.
Recording and Timeshift controls
II Play/Pause
Skip backward
Stop / Exit
Record
Skip forward
enter
To stop the recording, press Stop and then

Schedule recording

Press the button to bring up the Electronic Program Guide. Use the
epg
buttons to select the desired programme, and select Record from
directional
the list to open the recording options. Select Done to confirm the scheduled
options.
You can schedule several items to record. Select the Schedule tab from the
EPG menua to view the list of currently scheduled programmes. Different
schedules should not overlap and there must be at least a one-minute time
gap to set up between two schedules.
NOTE
Schedule recording still works when TV is in standby mode.

Timeshift mode

With the Timeshift turned on, you may pause and rewind normal TV viewing at
any time without missing any of the live broadcast. This can also allow you to
create a buffer and skip forward through commercials.
Press the II Play/Pause button on the remote control while in DTV mode
to activate the Timeshift function. The TV stores the channel from the point
of view you want to record.
you left off. Press Stop to exit Timeshift mode. If a USB device dedicated to
recording is disconnected, Timeshift files that were saved will automatically be
deleted.
to
to confirm when prompted.
ok
to resume from where
Press II Play/Pause again
/
15