Using The Component Video And Audio Input Jacks - Sanyo DS27425 Owner's Manual

USING THE COMPONENT VIDEO AND AUDIO INPUT JACKS

CONNECTING A DVD PLAYER
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)
‚
Connect a DVD Player or other equipment's interlaced
Component Video Out to the TV Component Video In
(Y-Pb-Pr) Jacks.
ƒ
Connect the DVD Player's Audio Out to the TV A/V2
Audio In (L/R) Jacks.
„
Press POWER to turn on the TV. Turn on external
equipment also.
…
To access Audio/Video inputs, press the INPUT key to
select COMPONENT2.
What you will need for connections:
‚
Component video cable – 1
ƒ
Audio Cable – 1
Remote Control
POWER
INPUT RESET
1 1 2 2 3 3
…
I A solid Blue screen with COMPONENT2 displayed
means that the Video mode is selected, but no signal
is being detected at the Component jacks. Check con-
nection, and turn on external equipment.
6
Need help?
Visit our Web site at
„
‚
www.sanyoctv.com
Notes: DVD Player component output must be set to
Interlaced (480i).
Audio / Video Input (AV2) and Component inputs
share the same audio (R/L) input jacks.
Connect equipment to the Component2 video
input or the AV2 video input, but not both types at
the same time.
TV BACK
AUDIO VIDEO INPUT
COMP AV2
VIDEO
AUDIO
OUTPUT
Y
Pb L
S-VIDEO
(MONO)
Pr
R
I Press INPUT key after connecting cables to access
the A/V inputs.There is NO need to tune to a blank
channel.
1-800-877-5032
or Call
DVD Player
VIDEO OUT
AUDIO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
L R COAXIAL
DIGITAL OUT S-VIDEO OUT
ƒ
UHF/VHF/CATV
75Ω
COMPONENT VIDEO OUT
Y P /C P /C
B B R R
‚