Table of Contents
Advertisement
Figure 42. Remove the fingerprint board and its bracket
Remove the system board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 33
"Remove the battery pack" on page 34
"Remove the speakers" on page 36
"Remove the coin-cell battery" on page 37
"Remove the memory module" on page 38
"Remove the M.2 solid-state drive" on page 39
"Remove the storage drive" on page 40
"Remove the Wi-Fi card" on page 42
"Remove the I/O board" on page 44
"Remove the fan" on page 45
"Remove the heat sink" on page 47
"Remove the LCD module" on page 48
"Remove the fingerprint board" on page 50
Step 1.
Disconnect the remaining cables on the system board.
52
Hardware Maintenance Manual
Advertisement
Table of Contents
