Table of Contents
Advertisement
Figure 34. Remove the heat sink
Remove the LCD module
Make sure the following FRUs (CRUs) have been removed. Also make sure the antenna cables have been
disconnected from the Wi-Fi card and taken out of the cable guiders.
"Remove the lower case" on page 33
"Remove the battery pack" on page 34
"Remove the Wi-Fi card" on page 42
Step 1.
Release the antenna cables from the fan hooks.
Figure 35. Release the antenna cables from the hooks
Step 2.
Disconnect the LCD cable.
48
Hardware Maintenance Manual
Advertisement
Table of Contents
