Installing The Io Board - Dell Vostro 3591 Service Manual
Hide thumbs
Also See for Vostro 3591:
- Service manual (90 pages) ,
- Setup and specifications manual (31 pages) ,
- Technical manualbook (50 pages)
Table of Contents
Advertisement
An "Invalid Configuration" error message is displayed prompting you to enter the BIOS and configure the date and
time. The computer starts functioning normally after setting the date and time.
Installing the IO board
Steps
1. Using the alignment posts, place the I/O board on the palm rest and keyboard assembly [1].
2. Replace the single (M2x4) screw that secures the I/O board to the palm rest and keyboard assembly [2].
3. Connect the VGA cable to the I/O board [1].
4. Connect the I/O board cable to the system board and close the latch to secure the cable [2].
Removing and installing components
43
Advertisement
Table of Contents
