Next steps
1. Replace the
micro SD card
2. Follow the procedure in
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
optical drive assembly
Steps
1. Loosen the three captive screws [1].
2. Remove the single (M2x4) screw, two (M2x2) screws, and six (M2.5x7) screws that secure the base cover to the palmrest and
keyboard assembly [2, 3, 4].
14
Removing and installing components
after working inside your computer
before working inside your computer