Timer Recording; Recording From An External Equipment (Vcr, Etc.) - Sanyo DVR-500 Instruction Manual

Timer Recording

Note:
This unit uses the International Time System (24-hour display).
Therefore the unit does not have Daylight Saving Time (DST)
function. You must set the clock when summer switches to winter
and vice versa. See page E18.
1. Set the program(s) first.
(See "Record Status" on page E33. )
2. Open "My Record List" screen and confirm the program to be
recorded. Make corrections if necessary.
(See "Record List" on page E37. )
Example:
Title Date
b
Iove 2004/05/03
news 2004/05/01
the king 2004/05/10
Press SETUP to exit
3. Press [SETUP] to close "My Record List" screen.
4. Press [POWER] to turn the power off.
Recording standby mode is set.
• The present time and "0" appear on the FL display.
• When the timer ON time arrives, the power turns on
automatically and recording starts.
• When the timer OFF time arrives, the power turns off
automatically and it is set to the standby mode.
Notes:
• If there is not enough space on the disc, as much of the
program as possible will be recorded on the disc.
• Be sure to check and/or change the disc after every timer
recording has been completed.
My Record List
Start Source
21:30 CATV 012
5
17:05 CATV 010
10:00 CATV 024
-E43-
Recording from an External Equipment (VCR,
etc.)
• Connect a VCR or other equipment to the AV1 IN or AV2
IN jacks first. See page E15.
• Select "Video" or "S-Video" in "AV Select" screen. See
page E32.
1. Load the disc.
2. Press [INPUT] repeatedly to select "VIDEO1 IN" or "VIDEO2
IN" for the equipment you have connected.
• "VIDEO1" or "VIDEO2" appears on the FL display.
3. Start playback on the other equipment.
4. Press [RECORD m] at the point you want to start recording.
Recording starts.
To pause recording
Press [k]. Press it again to restart recording.
To stop recording
Press [n].
For more details, see page E41.
CAUTION:
Almost all videos and DVD softwares on sale have a copy-
protection. You cannot record them using this unit.
Video Games cannot be recorded.
SETUP
RECORD m
Need help? Call
1-800-813-3435
POWER
INPUT
k (Pause)
n (Stop)