Tuner Setting; Setting "Channel Setup - Sanyo DVR-500 Instruction Manual

This unit is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set into
memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the
memory. In addition to normal VHF and UHF channels, this unit
can receive up to 125 Cable TV channels. To use this unit with an
antenna, set the "Channel Setup" menu.
Important Note:
• The antenna must be connected to this unit. See pages E8
~ E10.
• You may need extra instructions during this setting. If a
message appears, please follow the instructions displayed
on the TV screen.
• For improvement, on-screen display subject to change
without notice.

Setting "Channel Setup"

1. Open "Recording Setup" screen.
(Repeat steps 1 ~ 5 of "To Set the Clock" on page E18.)
Recording Setup
a
Record Mode HQ
5
Auto Chapter SP
Set Clock LP
Channel Setup EP
EP+
Press SETUP to exit Current selection
2. Press [p] to select "Channel Setup".
3. Press [ENTER] (or [a]) to select the sub menu.
Recording Setup
Record Mode
b
Auto Chapter Auto CH Scan
Set Clock Channel List
Channel Setup Modify Channel
Tuner Select
MTS Select
Press SETUP to exit
4. Press [p] or [o] to select the item.
Auto CH Scan ===> See page E20.
Channel List ===> See page E20.
Modify Channel ===> See page E21.
Tuner Select ===> See the right column.
MTS Select ===> See page E21.
If you use this unit for first time, select "Tuner Select".

TUNER SETTING

4, 5, a, b
5
-E19-
Tuner Select
Select the antenna system "CATV" or "TV".
1) Select "Tuner Select".
Recording Setup
Record Mode
Auto Chapter Auto CH Scan
Set Clock Channel List
Channel Setup Modify Channel
b
Tuner Select
MTS Select
Press SETUP to exit
2) Press [ENTER] (or [a]).
"Tuner Select Setup" screen appears.
Tuner Select Setup
a
Tuner Select CATV
TV
Press SETUP to exit Current selection
3) Press [a] to select the sub menu.
4) Press [p] or [o] to select "CATV" or "TV".
5) Press [ENTER]. "√" appears.
6) Press [b] repeatedly to return to "Recording Setup" screen.
Need help? Call
1-800-813-3435
ENTER
4
5