Record Status; Preparations; Setting "Record Time - Sanyo DVR-500 Instruction Manual

Record Status

The program timer switches the unit on and off to record a TV
program at a preset time.
You can program a total of 15 times slots to be recorded, during
the next one-year period.
These settings are retained in the program memory and will
repeat as long as a recordable disc is loaded in the unit.
Note:
The clock must be set before this setting. See "SETTING
THE CLOCK" on page E18.

Preparations

(Record Status ---> Record Time, How Often, Input Source,
TV, Record Mode & Title)
1. Select "Record Program" in "Menu" screen. See page E22.
Play/Edit Disc
4
a
Record Program Record Status
5
Setup Menu Record List
Press SETUP to exit
2. Press [ENTER] (or [a]).
"Recording Status" is highlighted.
Play/Edit Disc
b
Record Program Record Status
Setup Menu Record List
3. Press [ENTER] (or [a]) again.
"Record Show" screen appears.
Example:
Record Show
Verify the settings. Press ENTER to edit.
Start
Record Time 08:31 09:31
Record Day 2004/05/01
Input Source Tuner
TV 10
Record Mode SP
Title 20040501
Press SETUP to exit Done
4. Press [o] or [p] to select the item.
Record Time ===> See the right column.
Record Day ===> See page E34.
Input Source ===> See page E35.
TV ===> See page E35.
Record Mode ===> See page E36.
Title ===> See page E36.
Note:
After all settings are completed, press [p] to select "Done", and
then press [ENTER].
Menu
Menu
5
End
Cancel

Setting "Record Time"

Note:
If you have set "Record Status" already, open "Record List"
to check the list. Remove the unnecessary program from
the list first. See page E37.
1. Select "Record Time".
Example:
Verify the settings. Press ENTER to edit.
Start
Record Time 08:31
Record Day
Input Source Tuner
TV 10
Record Mode SP
Title 20040501
Press SETUP to exit
2. Press [ENTER].
The start and end time screen appears.
Example:
4
Press or use the number keys on remote
5
to change settings. Use the International Time
for the hour(00-23).
Hour Minute
4
Start 08 : 31 End
5
Press SETUP to exit
3. Press [o] or [p] (or the number buttons on the remote control)
to set the start and end times.
Note:
Press [a] or [b] to move the cursor.
4. Press [a] to select "Done".
5. Press [ENTER].
The record time is set.
The screen returns.
Example:
Verify the settings. Press ENTER to edit.
Start
Record Time 21:30
Record Day
Input Source Tuner
TV 10
Record Mode SP
Title 20040501
Press SETUP to exit
Note:
To cancel the setting, select "Back" or "Cancel" in the screen,
and then press [ENTER].
-E33-
Record Show
End
09:31
2004/05/01
Done Cancel
Record Show
Hour Minute
09 : 31 Done
Back
Record Show
End
22:00
2004/05/01
Done Cancel