3..TOGO.PCB/Image.Sensor
SD.cover.unit
・ Open.the.SD.cover.
・ Take out the four screws (#614).
・ Remove.the.SD.cover.unit.
Discharge.of.main.condenser
・ Peel off the tape [TA-0015 (8.5×17)].
・ Discharge.the.main.condenser.
TA-0015 (8.5×17)
NICS
#614×4
SD.cover.unit
WARNING
!
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
You must discharge the main condenser according to the instruction
of this repair manual after you remove the cover.
- D9・D7000 -
VBA29001-R.3814.A
#440
#B431
#436
#435
2KΩ/5W
#859