Symbols In This Manual; Symbols On The Product - Ryobi R18XPHTA0 Manual

Hide thumbs

Table Of Contents

Table of Contents

■

After each use, clean the debris from the blades

with a stiff brush, and then carefully apply a rust

preventative lubricant before refitting the blade cover.

The manufacturer recommends using rust preventative

lubricant spray to apply an even distribution and reduce

the risk of personal injury from contact with the blades.

For information about a suitable spray product, check

with an authorised service centre.

■

Check all nuts, bolts, and screws at frequent intervals

for proper tightness to ensure that the product is in safe

working condition. Any part that is damaged should be

properly repaired or replaced by an authorised service

centre.

SYMBOLS ON THE PRODUCT

Safety alert

Regulatory Compliance Mark (RCM).

The product meets applicable

regulatory requirements.

Read and understand all instructions

before operating the product. Follow all

warnings and safety instructions.

To prevent serious injury, do not touch

the cutting blades.

Wear eye, ear, and head protection.

Do not expose the product to rain or

damp conditions.

Wear non-slip, heavy-duty protective

gloves.

Wear non-slip safety footwear when

using the product.

Keep sufficient distance away from

electrical power lines.

Beware of thrown or flying objects.

Keep all bystanders, especially

children and pets, at least 15 m away

from the operating area.

Guaranteed sound power level

Waste electrical products should not

be disposed of with household waste.

Please recycle where facilities exist.

Check with your local authority or

retailer for recycling advice.