Flicker-Reduction Setting (Video Clip Shooting Only) - Sanyo Xacti VPC-J4EX Instruction Manual

FLICKER-REDUCTION SETTING (VIDEO CLIP SHOOTING ONLY)

The flicker-reduction setting reduces the flicker that results when filming video
clips under fluorescent lights and the like where the background lighting pul-
sates at the frequency of the power supply. The flicker-reduction setting is set
for a frequency of 50 Hz.
1
Set the camera to the video clip shooting mode (see page 43), and
display the EXPERT Mode Shooting Setting Screen (see page 36).
2
Select the desired flicker-reduction
setting from the flicker-reduction
menu.
: Turns off the flicker-reduction set-
ting.
: Turns on the flicker-reduction set-
ting.
3
Press the SET button.
h This completes the flicker-reduction setting.
HINT
i Note that although the flicker-reduction setting decreases the image flicker
that occurs under fluorescent lighting, the image quality may deteriorate
slightly.
i If the flicker-reduction setting is used outdoors on a very bright day, a hala-
tion effect may occur.
i If the flicker-reduction is set to
page 84) becomes fixed at
95
English
, then the ISO sensitivity setting (see
.
FLICKER REDUCT
OFF