Checking The Remaining Card Memory - Sanyo Xacti VPC-J4EX Instruction Manual

CHECKING THE REMAINING CARD MEMORY

You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see "Possible No. of
Images/Possible Shooting Time/Possible Recording Time" on page 178.
Checking the remaining number of images and video recording time
1
Set the camera to the desired shoot-
ing mode.
h The remaining number of images
appears in the upper right of the
LCD monitor (for the still image and
sequential shots shooting modes).
h The remaining video recording time
appears in the upper right of the
LCD monitor (for the video clip
shooting mode).
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of
images or the remaining video
recording time is "0", you cannot
capture any more images. To cap-
ture more images, either install a
new card, or save the images to a
computer (see page 140) and then
erase them (see page 77) from the
card.
Remaining number of images
<Still image/sequential
shots mode>
English
136