Sanyo Xacti VPC-J4EX Instruction Manual page 173

Problem
The image is
too bright.
The image is
not in focus.
Viewing
images
Cause
The forced
flash mode is
selected.
The subject
was too bright.
The ISO
sensitivity
setting is
incorrect.
The subject is
too close to the
digital camera.
The focus
setting is not
correct.
The digital
camera moved
when the
shutter was
released.
The focus is
not locked
properly.
The lens is
dirty.
Action
Select a
different flash
mode.
Use the
exposure
correction
function.
Set the ISO
sensitivity to
.
Select the
correct focus
setting for your
needs.
Hold the digital
camera
correctly and
slowly press
the shutter
release button
halfway to lock
the focus.
Then press the
shutter release
button all the
way to capture
the image.
Clean the lens.
English
Reference
page
65
94
84
61, 88
38, 43
21
170