Sanyo VPC-SX560E Instruction Manual page 33

4
Press the MODE button.
œ The setting screen selected in step 3 appears.
œ When the selector dial is set to W for playback, then the Still Image Playback Setting
Screen appears. When the selector dial is set to Y or X, a 9-image display appears
for image selection of steps 3 (see page 84). If this screen appears, press the SET button
and then the MODE button.
œ For how to operate the setting screens, see "SETTING SCREEN BASIC OPERATIONS"
on page 40.
Exiting the Setting Screens
Press the MODE button
œ The Setting Screen disappears.
Exiting the Option Setting
Screens
Turn the selector dial to a mark other than P.
œ The Option Setting Screen is exited and either a shooting
screen or playback screen appears.
MODE button
SET button
Selector dial
English
30