Interface Modules - Siemens SIPROTEC 7UM62 Manual

Multifunctional machine protection

Hide thumbs Also See for SIPROTEC 7UM62:

Table of Contents

3.1.2.4 Interface Modules

Replacing Interface Modules

The interface modules are located on the C–CPU-2 board ((1) in Figure 3-1 and 3-2). The following figure

shows the PCB with location of the modules.

C-CPU-2 board with interface modules

Please note the following:

• The interface modules can only be replaced in devices for panel flush mounting and cubicle mounting.

Devices in surface mounting housings with double-level terminals can be changed only in our manufacturing

• Only interface modules can be used with which the device can also be ordered from the factory in accor-

dance with the order number (see also Appendix A.1).

SIPROTEC, 7UM62, Manual

C53000-G1176-C149-7, Release date 03.2010

Mounting and Commissioning

3.1 Mounting and Connections