Installing The Blades - Hunter Alexander 51939 Installation Manual

1886
Using both hands, lift the fan body
from the hook
Note:
Fan style may vary.
5
Ceiling Bracket
Installing the Fan Body
Align the hanging slots on both
sides of the fan body with the two
partially installed canopy screws.
Slide the two slots on both sides of
the fan body between the head of
the screws and rotate the fan body
counterclockwise so the screws
hold the fan body firmly in place.

Installing the Blades

Hanging Fan Wiring
Put the blade washers found in the
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
Repeat x5
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Canopy Blades
bag
Install the remaining two
canopy screws by holding the
fan body cover to the ceiling
mounting plate. Tighten all
four screws securely.
Note:
Fan style may vary.
hardware
Blade Screw
bag
Blade Washer
bag
IMPORTANT
Light Glass/Bulbs
2 of 4
Canopy Screw
x15
x15
Pull Chains