Table of Contents
Advertisement
When servicing the blades, be aware that
even though the power source is switched
off, the blades can still be moved.
The blade on the product is sharp. Use
extreme caution and wear heavy-duty
gloves when fitting, replacing, cleaning or
checking bolt security.
Replace damaged blades and bolts in sets
to preserve balance.
The blade bolts must be adequately
tightened.
See
recommendations for blade bolt torque
which can be found in the product
specification table in this manual.
CLEARING BLOCKAGES
Stop the product, remove the isolator key
and the battery. Make sure that all moving
parts have come to a complete stop.
Always wear heavy-duty gloves when
checking or clearing a blockage.
The blades are sharp and the blockage
itself could be a sharp object.
Remove the grass catcher, check for and
carefully clear obstructions.
Check the grass discharge chute for
blockages and carefully clear.
Turn the product on its side, check its
underside, and the area around the
blade. If any blockages are found, remove
carefully. Remember the blade may move
during cleaning.
RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise in use and the operator
should pay special attention to avoid the
following:
injury caused by vibration
Always use the right tool for the job. Use
designated handles and restrict working
time and exposure.
injury caused by noise
Exposure to noise can cause hearing
injury. Wear ear protection and limit
exposure.
injury from contact with the blades
injury caused by thrown objects
6
the
manufacturer's
RISK REDUCTION
It has been reported that vibrations from
handheld tools may contribute to a condition
called Raynaud's Syndrome. Symptoms may
include tingling, numbness and blanching of
to cold. Hereditary factors, exposure to cold
and dampness, diet, smoking and work
practices are all thought to contribute to the
development of these symptoms. There are
measures that can be taken by the operator to
possibly reduce the effects of vibration:
Keep your body warm in cold weather.
When operating the product, wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
After each period of operation, exercise to
increase blood circulation.
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your physician.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.
SYMBOLS ON THE PRODUCT
Read and understand all
instructions before operating
the product, follow all warnings
and safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate on inclines
greater than 15°. Mow across
the face of slopes, never up
and down.
Do not expose to rain or damp
condition.
Advertisement
Table of Contents
