Sharp AQUOS BOARD 4W-B65FT5U Operation Manual page 15

[ENGLISH]
Contents
1. Part Names
2. Introduction
3. Direct Button Operation
1. Changing Input Source
2. Changing Channels
3. Changing Volume / MUTE
4. Displaying Manual
Displaying Current Input
5.
Mode
6. Sleep Timer
7. APPS
8. CEC Menu
4. On-Screen Display Menu
5. Application
6. Using a PC
7. Using the touch function
8. Appendix
9. Specifications
10. Trademarks
11. Dimensional Drawings
Ver. 1.1
>> Direct Button Operation
Changing Channels
<<
You can change channels in several ways.
Method 1
Using
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
1.
/ on the remote control unit or on the TV.
To select a 1 or 2-digit channel number (e. g., Channel 5):
Press 5 ENTER
To select a 3-digit channel number (e. g., Channel 115):
Press 1 1 5 ENTER
To select a 4-digit channel number (e. g., Channel 22.1):
Press 2 2 • (DOT) 1
NOTE
• When selecting a 1-digit channel number, it is
not necessary to press 0 before the number.
• When you enter 0-9 only, channel selection
will be made if there is no operation within a
few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few
seconds.
• When you enter 0-9 and • (DOT), channel
selection will be made if there is no operation
within a few seconds.
ENTER
en-US 14