Table of Contents
Advertisement
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
3.5-inch primary hard disk drive
For access, do the following:
1. Remove the "Computer cover" on page 30.
2. Disconnect the signal cable and the power cable from the 3.5-inch primary hard disk drive.
Removal steps
.
Chapter 7
CRU replacement
35
Advertisement
Table of Contents
