Sanyo PLC-XP57L Specifications

5500 ANSI LUMENS
PLC-XP57L
XGA Portable Multimedia Projector
* Lens sold separately
5,500 ANSI LUMENS LCD PROJECTOR
Utilizing high-output 318-watt UHP lamps as its light source,
the PLC-XP57L delivers an amazing 5,500 ANSI lumens of
brightness. Stacking two projectors in the twin-stack
configuration can achieve up to 11,000 ANSI lumens of
brightness.
OUTSTANDING CONTRAST RATIO – 1000:1
PLC-XP57L contains an optical compensator with a High-
Contrast Optical System that achieves a contrast ratio as large
as 1000:1, exhibiting more natural and smooth gradation.
FULL 10-BIT DIGITAL IMAGE PROCESSING
With an IC that uses a full 10-bit digital processing, PLC-XP57L
delivers four times more color gradation steps than a
conventional projector. As a result, it projects beautiful images
with impressive color precision, rendering even tiny nuances in
expressive details.
NETWORK CONTROL WITH PJ-NET ORGANIZER PLUS II
An optional PJ-Net Organizer Plus II allows for simple control
and management of projectors via a CAT5 network connection.
The user can use an optional network management software
called PJ Master, and be able to centrally control all PJ-Net
Organizer-mounted projectors within the network. The PJ-Net
Organizer Plus II has SNMP capability and allows connected
computers to capture and modify the projected image, so other
users will be able to write texts and draw figures on the
captured image on their computers using drawing tools.
UPWARD / DOWNWARD PROJECTION
The PLC-XP57L can be tilted upward to facilitate ceiling-mount
and floor mount installation.
VERTICAL/HORIZONTAL EDGE ENHANCEMENT
Images so crisp and smooth that is only made possible by the
seamless edge enhancement technique. Enhancing image
outlines while minimizing granular noise emphasis, the PLC-
XP57L generates sharp and realistic images.
24/7* OPERATION
A newly developed liquid crystal panel with an optical
compensator that creates linear polarization, together with
improved optical block cooling system, gives the PLC-XP57L
the capability of being operated on a 24/7* basis.
* In order to maintain a stable lamp condition, at least one hour of rest for the
projector is required in each 24-hour period.
* For appropriate care and use of the projector, regular cleaning of air filters is
necessary. Cleaning is recommended once a week. However, the frequency on
which cleaning is required depends upon the installation or operation environments.
* To enhance ventilation and related reliability, the user may choose to utilize
optional external filter "POA-FBOX130".
PRESENTATION TECHNOLOGIES
Issued 5/06
TRUE XGA
** Image shows PLC-XP57L w/ LNS-S30
21605 Plummer Street
Chatsworth, CA 91311
Ph: 888-337-1215 (toll-free)
Fax 818.717.2719
www.sanyolcd.com
MULTIMEDIA PROJECTOR
S p e c i f i c a t i o n s
Resolution
Brightness (typical)
Uniformity
LCD Panel System
Number of Pixels
Contrast Ratio
Projection Image (diagonal)
Aspect Ratio
Throw Distance
Zoom/Focus
Up/Down Ratio
Digital Keystone Correction
Projection System
Projection Lens
Lens Throw Ratio
Projection Lamp
Scanning Frequency
Dot Clock
Color System
Computer Compatibility
Sound Output
Voltage
BTU Rating
dB Rating
Power Consumption
Dimensions (WxHxD)
Net Weight
User Maintenance
Input Terminal Panel 1
Input Terminal Panel 2
Input Terminal Panel 3
Additional Input Terminals
Output Terminals
Included Accessories
VGA Cable • Serial/USB Control Cables • PIN label • Lens
Optional Accessories
Warranty
Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.
Optional Lens Specifications
Standard On-Axis
Short Fixed
Part No. LNS-S30 LNS-W32
Zoom Power No
Throw 1.8 - 2.3:1 0.8:1
Ratio
U/D 10:0 - 1:1 1:1
Ratio
F Stop 1.8 - 2.1 2.6
Length 6.02" 9.25"
Weight 1.8 lbs. 3.5 lbs.
XGA (1024 x 768)
5500 ANSI Lumens
90%
1.3" TFT Poly-Silicon x 3
2,359,296 (786,432 x 3)
1000:1 (full on/off)
31" - 400"
4:3
Dependent on Lens (4.6' - 48.2' w/ LNS-S30)
Dependent on Lens
1:1 (LNS-W32) or 10:0 - 1:1 (others)
Vert. +/- 35°, Horiz. +/- 15°
Dichroic mirror & X prism w/ PBS
Lens Sold Separately
Dependent on Lens (1.8-2.3:1 w/ LNS-S30)
318W UHP
H 15-100kHz; V 48-100Hz (auto sense/select)
180 MHz
PAL/PAL-M/PAL-N/SECAM/NTSC/NNTSC4.43
UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA
Two-piece stereo 2W rms
100-240V AC; 50/60/Hz (auto sense/select)
1638
36.0 (Eco mode)
480W
12.6" x6.6"x16.9"
17.4 lbs.
Clean air filters, replace lamp assembly
D-Sub 15 x1(In/Monitor Out) • DVI–D x1 (w/HDCP)
• Audio x1 (In/Monitor Out : stereo mini jack)
RGBHV or Composite/Component Video (BNC x5)
• Audio x1 (stereo mini jack)
Composite/Component Video (RCA x3)
• S-Video x1 • L & R Audio (RCA x2)
Wired remote control jack x 1 (stereo mini jack)
• USB x 1 (type B) • Control Port x 1 (Mini Din 8-pin)
D-Sub 15 x 1(Input1/Monitor Out) • Variable audio x1
(Input1/Monitor Out : stereo mini-jack)
Wired/Wireless I/R Remote Control w/Mouse Pad and
Laser Pointer • Batteries (two "AA") • AC power cord •
Attachment (POA-LNA03) • Owner's manual (CD-ROM &
Quick Manual) • Lens Replacement Manual
• PJ-Net Organizer Plus II (POA-PN03) • Filter Box
(POA-FBOX130) • POA-FIL130 (Replacement Filter for
POA-FBOX130) • Replacement Lamp (6103287362) •
Optional Lenses (see below)
Three years parts and labor; 90 days original lamp;
Quick Repair Program under warranty
Short Zoom Long
Zoom
LNS-W31A LNS-T31A
Power Power
1.25 - 1.8:1 2.3 - 4.2:1
10:0 - 1:1 10:0 - 1:1
2.5 - 3.1 2.0 - 2.9
7.6" 8.5"
3.7 lbs. 4.2 lbs.
Ultra Long
Zoom
LNS-T32
Power
4.2 - 6.0:1
10:0 - 1:1
2.1 - 2.7
4.6"
3.7 lbs.
© 2006 SANYO