Specifications; Transmitter Input - Shure GLXD16E User Manual

Specifications

Tuning Bandwidth
2400–2483.5 MHz
Working Range
Indoors Up to 30 m (100 ft) typical, Up to 60 m (200 ft) maximum
Outdoors
Up to 20 m (65 ft) typical, Up to 50 m (165 ft) maximum
Note: Actual range depends on RF signal absorption, reflection and interference.
Transmit Mode
Frequency Hopping
Audio Frequency Response
20 Hz – 20 kHz
Dynamic Range
120 dB, A-weighted
RF Sensitivity
-88 dBm, typical
Total Harmonic Distortion
0.2%, typical
RF Output Power
10 mW E.I.R.P. max
GLXD1
Dimensions
90 x 65 x 23 mm(3.56 x 2.54 x 0.90in.), H x W x D (without antenna)
Power Requirements
3.7 V Rechargeable Li-Ion
Housing
Cast Metal, Black Powdercoat
Input Impedance
900 kΩ
RF Output Power
10 mW E.I.R.P. max

Transmitter Input

Connector
4-Pin male mini connector (TA4M)
Configuration
Unbalanced
Maximum Input Level
1 kHz at 1% THD
+8.4 dBV (7.5 Vp-p)
Antenna Type
Internal Monopole
14
Operating Temperature Range
-18°C (0°F) to 57°C (135°F)
Note: Battery characteristics may limit this range.
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
Polarity
Positive voltage applied to the tip of the guitar cable phone plug produces
positive voltage at the tip of the high impedance ¼-inch output.
Battery Life
Up to 16 hours
Guitar Tuner
Tuning Accuracy
Tuning Range
Channel Count
4 typical, Up to 8 maximum
Pin Assignments
TA4M
1 ground (cable shield)
2 + 5 V Bias
3
audio
4 Tied through active load to ground (On
instrument adapter cable, pin 4 floats)
±1 cent
F#0 to C8