Using The Tuner; Strobe Mode; Connect To The Computer - Shure GLXD16E User Manual

Using the Tuner

1. Press the footswitch to enter tuner mode.
2. Play each note individually. The display shows the name of the note.
3. Adjust tuning until both indicators illuminate and the needle or strobe indicate that tuning is correct.
Needle Mode
Both tuning indicators and the center green segment will illuminate when
the note is in tune.
Firmware
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate addi-
tional features and enhancements. To take advantage of design improvements, new versions of the firmware can be downloaded and installed using the
Shure Update Utility tool.

Connect to the Computer

Connect the device to your computer using the USB to Micro USB cable supplied with your GLX-D system.
12
In Tune
Flat
Sharp
GLXD4
o / on power
GLXD6
GLXD1
GLXD2

Strobe Mode

Both tuning indicators will illuminate and the strobe segments will re-
main stationary when the note is in tune.
mic out instr out
In Tune
Flat
Sharp