Selecting And Preparing Weld Output Cables - Miller SRH-333 Owner's Manual

3-7. Selecting And Preparing Weld Output Cables

Tools Needed:
2
3
2 1
10 ft (3 m)
10 ft (3 m)
1
Determine total cable length in weld
circuit and maximum welding am-
peres. See Section 3-8 to select
proper cable size.
Use shortest cables possible.
Do not use damaged cables.
2
Use lugs of proper amperage
capacity and hole size for connect-
ing to work clamp, electrode holder,
and weld output terminals.
3
Install according to manufacturer's
instructions.
4
Install onto work cable.
For Example,
Total Cable
Length In Weld
Circuit = 20 ft (6 m)
4
Weld Output Cable
Terminal Lug
Insulated Electrode Holder
Work Clamp
sb6.1 11/92 – S-0653
OM-2230 Page 15