Testing Failover And Failback Of The Agile Fusion Manager - HP IBRIX 9300 Administrator's Manual

Table of Contents

[root@x109s1 ~]# ibrix_fm -f

NAME

------ ----------

X109s1 172.16.3.100

Command succeeded!

1 1.

Install a passive agile management console on a second file serving node. In the command,

the -F option forces the overwrite of the new_lvm2_uuid file that was installed with the

IBRIX software. Run the following command on the file serving node:

/ibrix/ibrixinit -tm -C <local_cluster_interface_device>

–v <agile_cluster_VIF_IP> -m <cluster_netmask> -d <cluster_VIF_device> -w 9009

–M passive -F

For example:

[root@x109s3 ibrix]# <install_code_directory>/ibrixinit -tm -C bond0 -v 172.16.3.1

-m 255.255.248.0 -d bond0:0 -V 10.30.83.1 -N 255.255.0.0 -D bond1:0 -w 9009

-M passive -F

NOTE:

fminstance.xml file. Run the following command:

grep –i current

12.

From the active management console, verify that both management consoles are in the cluster:

ibrix_fm -f

For example:

[root@x109s3 ibrix]# ibrix_fm -f

NAME

------

x109s1

x109s3

Command succeeded!

13.

Verify that the newly installed management console is in passive mode:

ibrix_fm –i

For example:

[root@x109s3 ibrix]# ibrix_fm -i

FusionServer: x109s3 (passive, quorum is running)

=============================

Command succeeded

14.

Enable HA on the server hosting the agile management console:

ibrix_server –m

NOTE:

following error:

com.ibrix.ias.model.BusinessException: x467s2 is not associated with any power sources

Use the following command to define the iLO parameters into the IBRIX cluster database:

ibrix_powersrc -a -t ilo -h HOSTNAME -I IPADDR [-u USERNAME -p PASSWORD]

See the installation guide for more information about configuring iLO.