Samsung WD19N8710K Series User Manual page 22

Installation
STEP 3 Adjust the levelling feet
STEP 4 Connect the water hose
The provided hose adaptor may differ with the model. This step guides you through
connecting the connector-type adaptor. If you are provided with the screw-type adaptor,
go to 7.
22 English
Untitled-3 22
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
3. When levelling is complete, tighten the
nuts using the spanner.
Connect the water hose to the water tap.
1. Remove the adaptor (A) from the water
hose (B).
A
B
2. Use a Phillips screwdriver to loosen
four screws on the adaptor.
6/18/2019 5:27:11 PM