Installing The Web Management Utility - D-Link DGS-1248T Quick Installation Manual

Ports 1 & 48 Status LEDs
Link/Act
On When the Link/Act LED lights on, the respective
port is successfully connected to an Ethernet
network.
Blinking When the Link/Act LED is blinking, the port is
transmitting or receiving data on the Ethernet
network.
Off There is no link.
SPEED:
On : When the green light is on, the respective port is
(Green) connected to a 1000Mbps Gigabit Ethernet
network.
On When the Amber light is on, the respective port is
(Amber) connected to a 100Mbps Fast Ethernet network.
Off : When the respective port is connected to a
10Mbps Ethernet or there is no link
Option Ports 45~48 Mini-GBIC Status LEDs
Link/Act
On When the Mini GBIC module is installed and
connected to a network, the Link/Act LED lights on.
Blinking When the LED is blinking, the Mini GBIC module is
receiving data on a network.
Off There is no link.
Installing the Web Management
Utility
Through the Web browser you can configure switch functions such as
VLAN, Trunking, QoS... etc.
The following instruction guides you to install the Web Management
utility.
1. Insert the Utility CD in the CD-ROM Drive.
2. From the Start menu on the Windows desktop, choose Run.
3. In the Run dialog box, type D:\Web Management Utility\setup.exe
(D:\ depends where your CD-ROM drive is located) and click OK.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Program Files ->
5