Omron BP7250CAN Instruction Manual page 23

2. Place your hand through the cuff loop. Pull
the cuff until it reaches your upper left arm.
Note
• The bottom edge of the arm
cuff should be 0.5 inch (1 to
2 cm) above the inside elbow.
The air tube is on the inside of
your arm and aligned with
your middle finger.
3. Make sure that the air tube
is positioned on the inside of your arm and
wrap the cuff securely, so it can not move
around your arm.
To take a measurement on your right arm
When you take a measurement on your right arm, the air tube should run
along the side of your elbow, along the bottom of your arm. Be careful not
to rest your arm on the air tube.
23
0.5 inch (1 to 2 cm)
Bottom edge Bottom edge