Step 3 - Setting Up Device Ip Address - Quantum QN-I-210 Quick Setup Manual

Step 3 - Setting up device IP address

Click "Configure" and set the device IP address by selecting the required options.

Connectivity Mode – Select the connectivity mode.

Protocol - DHCP, Static or PPPoE

Interface – Select interface

VLAN Assignment- Enable parameter. Enter VLAN ID and click "Fetch IP Address" to
get the respective IP in case of VLAN setup is required.
Figure 3
Click "Proceed" to apply configuration and turn to the next page.
| www.qntmnet.com
8