Setting Up Screen Call - Sanyo Katana User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded
announcement, either one that is prerecorded or one that you record.You
can also record the caller's message into the Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right softkey) >
Screen Call.
To set Auto Screen Call:
1.
Select
2.
Select On.
3.
Set the answering time by using numeric keys or by pressing the
navigation key up or down.
4.
Press OK (left softkey). (The
display.)
Tip:
While the caller's message is being recorded, press
to stop recording and disconnect the call.
Selecting an Announcement for Screen Call
To select a Screen Call announcement:
1.
Select
Announcement.
2.
Depending on your preference, select Pre-Recorded
or Custom.
120 Section 2H: Using Your Phone's Voice Services
> Tools > Voice Services > Screen Call > Auto.
> Tools > Voice Services > Screen Call >
icon is displayed on the standby
to answer the call, or press