Checking Phone Status Using Asr; Asr Settings - Sanyo Incognito User Manual

Checking Phone Status Using ASR

You can use ASR to obtain information about your phone:
Status (all of the following except My Phone Number)
Time
Signal Strength
Network
Battery
My Phone Number
1.
Touch and hold .
2. When you hear "Say a command," say " Check ."
3.
When you hear "Which status item?," say a command.

ASR Settings

To change ASR confirmation:
1. Press and hold or
2.
Press SETTINGS (right softkey) > Confirmation .
3.
Highlight an option and press
Automatic to ask for confirmation only when the system is
not sure what you said.
.
.
Always Confirm to always ask for confirmation.
Never Confirm to never ask for confirmation.
To adapt the system to your voice:
1.
Press and hold or
2. Press SETTINGS (right softkey) > Adaptation > Adapt Voice .
3.
Press START (left softkey) and repeat each word, phrase, or
telephone number you hear.
To reset the adaptation:
1. Press and hold or
2.
Press SETTINGS (right softkey) > Adaptation > Reset Voice >
YES (left softkey).
To change the ASR mode:
1. Press and hold or
2.
Press SETTINGS (right softkey) > Audio Modes .
3.
Highlight an option and press
Expert Mode to sound a beep only.
Prompt Mode to prompt for required information.
.
.
.
.
2G. Voice Services 65