Scheduling A Consistency Check; Setting Factory Defaults - HP HPE MR Gen11 User Manual

3. In the Advanced Controller Management screen, select Manage MegaRAID Advanced Software Options .
4. In the Manage MegaRAID Advanced Software Options screen, view the list of advanced options that are currently enabled.
NOTE: NOTE: In this version of the controller, all of the advanced software options are activated.

Scheduling a consistency check

Scheduling a consistency check
Procedure Procedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen11 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Schedule Consistency Check .
4. In the Schedule Consistency Check screen, select the frequency.
5. Assign the start date for the consistency check.
6. Assign the start time for the consistency check.
7. Select the consistency check mode. The options are:
Sequential - Checks the logical drives one at a time.
Concurrent - Checks all the logical drives simultaneously.
8. Select the Start Immediately option to start the consistency check on all logical drives except any excluded drives.
9. Click Exclude Logical Drives to specify the logical drives to exclude from the consistency check.
10. Click Apply Changes.
The Success screen appears to confirm that the operation is complete.

Setting factory defaults

Setting factory defaults
Procedure Procedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen11 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Set Factory Defaults.
The warning message appears to request confirmation.
4. Click Confirm and Yes.
Configuring advanced controller properties Configuring advanced controller properties
Procedure Procedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen11 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Properties .
3. In the Advanced Controller Properties screen, click Cache and Memory to configure the cache and memory settings.
For more information, see Configuring cache and memory settings.
4. Click Patrol Read to configure the patrol read settings.
For more information, see Configuring patrol read settings.
5. Click Spare to configure the spare settings.
For more information, see Configuring spare settings.
6. Click Task Rates to configure the task rates settings.
For more information, see Configuring Task Rates.
7. Modify any of the following controller properties:
HPE MR Gen11 Controller User Guide 41