Using Uefi System Utilities - HP HPE MR Gen11 User Manual

Table of Contents

Troubleshooting: HPE MR Storage Administrator displays information related to drive failures, device failures, and other issues. It also provides

Troubleshooting

recommendations and displays contextual links, helping you to locate the drives/devices that have issues and troubleshoot them. You can also download a

report of the devices and their configurations, properties, and settings and send it to Hewlett Packard Enterprise Support for further troubleshooting.

Obtain HPE MR Storage Administrator installation files through the Service Pack for ProLiant (SPP), which you can download from the Hewlett Packard

Enterprise website (https://www.hpe.com/servers/spp/download

https://www.hpe.com/servers/spp/download). Be sure to use the latest SPP version for the server.

For more information about the HPE MR Storage Administrator, see HPE MR Storage Administrator User Guide

StorCLI

The Storage Command Line Interface (StorCLI) tool is the command line management software designed for the HPE MR Gen11 Controller. StorCLI is a command

line interface that is designed to be easy to use, consistent, and easy to script.

Obtain StorCLI through the SPP, which you can download from https://www.hpe.com/servers/spp/download

For more information about StorCLI, see HPE MR StorCLI User Guide

UEFI System Utilities

The UEFI System Utilities is embedded in the system ROM. The UEFI System Utilities enables you to perform a wide range of configuration activities, including:

Configuring system devices and installed options

Enabling and disabling system features

Displaying system information

Selecting the primary boot controller

Configuring memory options

Selecting a language

Launching other pre-boot environments such as the Embedded UEFI Shell and Intelligent Provisioning

For more information on the UEFI System Utilities, see UEFI System Utilities User Guide for HPE ProLiant Gen11 Servers and HPE Synergy

For onscreen help, press F1 F1.

Subtopics

Using UEFI System Utilities

To use the System Utilities, use the following keys.

Action

Access System Utilities

Navigate menus

Select items

Save selections

Access Help for a highlighted configuration

option

Scan the QR code on the screen to access online help for the UEFI System Utilities and UEFI Shell.

Default configuration settings are applied to the server at one of the following times:

Upon the first system power-up

After defaults have been restored

Default configuration settings are sufficient for typical server operations. However, you can modify configuration settings as needed. The system prompts you for

access to the UEFI System Utilities each time the system is powered up.

HPE MR Storage Administrator User Guide.

https://www.hpe.com/servers/spp/download. Be sure to use the latest SPP version for the server.

HPE MR StorCLI User Guide.

UEFI System Utilities User Guide for HPE ProLiant Gen11 Servers and HPE Synergy .

Key

F9 during server

POST

Up and Down

arrows

Enter

F10