Updating The Software - Bosch WMH6Y790GB Instruction Manual And Installation Instructions

Home Connect
en
Use either of the right-hand arrow
5.
buttons to select Continue.
The network settings are now reset.
Your appliance is no longer connected
to your home network or the
Home Connect app.
You can exit the Home Connect
6.
settings by selecting the Remote
Start } button.
If you want to operate the
Note: .
appliance via the Home Connect app
again, you must reconnect it to your
home network and to the
Home Connect app either automatically
or manually.

Updating the software

You can update the
Home Connect software on your
appliance. As soon as a new update is
available, a note appears in the display
panel for your appliance.
You can install the update directly via
the message on the display panel or via
the appliance settings.
Switch the appliance on.
1.
Press and hold the Remote Start }
2.
button for more than three seconds.
Aut. network log-in appears in the
display panel.
Use either of the left-hand arrow
3.
buttons to select Software update.
52
Use either of the right-hand arrow
4.
buttons to select Install now.
Update installation will now start. This
process may take several minutes. Do
not switch the appliance off while
updates are being installed.
You can exit the Home Connect
5.
settings by selecting the Remote
Start } button.
If no software update is
Note: .
available, Not available appears in the
display panel. The
Home Connect software is completely
up-to-date.