Related Manuals for Bosch WMH4Y8S9DN
Summary of Contents for Bosch WMH4Y8S9DN
- Page 1 Washing machine WMH4Y8S9DN siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Changing the programme ..43 Faults and what to do about Cancel the programme ..43 them..... . 60 Programme end during rinse hold .
-
Page 5: Intended Use
Intended use Intended use Safety instructions T he following safety information This appliance is intended for private ■ I n t e n d e d u s e S a f e t y i n s t r u c t i o n s and warnings are provided to domestic use only. - Page 6 Safety instructions Do not allow children to Keep packaging, plastic film ■ clean or maintain this and packing components away appliance unsupervised. from children. Keep children under 3 years ■ Warning and pets away from this Risk of poisoning! appliance. Detergents and care products Do not leave the appliance ■...
-
Page 7: Installation
Safety instructions If using a residual current Installation ■ circuit breaker, only use one Warning that bears the following Risk of electric shock/fire/ mark: z. The presence of material damage/damage to this mark is the only way to the appliance! be sure that it fulfils all the If the appliance is not installed applicable regulations. - Page 8 Safety instructions If the hoses and mains Warning ■ cables are not correctly Risk of injury/material routed, they may constitute a damage/damage to the tripping hazard, which may appliance! result in injury. The appliance may vibrate or ■ Route hoses and cables move when in operation, such that they do not potentially resulting in injury...
-
Page 9: Operation
Safety instructions The appliance is secured for Do not use cleaning agents that ■ transportation by transport contain solvents. locking devices. If the Warning transport locking devices are Risk of injury! not removed before the If you support your weight/sit appliance is operated, this ■... -
Page 10: Cleaning/Maintenance
Safety instructions Warning Cleaning/Maintenance Eye/skin irritation! Warning Detergent and care products Risk of death! may spray out if the detergent The appliance is powered by drawer is opened while the electricity. There is a risk of appliance is in operation. electric shock if you come into Rinse eyes/skin thoroughly if contact with live components. - Page 11 Safety instructions Warning Caution! Risk of poisoning! Material damage/damage to the appliance Poisonous fumes may be given off by cleaning agents that Cleaning agents and agents for contain solvents, e.g. cleaning pretreating laundry (e.g. stain solvent. removers, prewash sprays, etc.) Do not use cleaning agents that may cause damage if they contain solvents.
-
Page 12: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 25 The displays provide information protection about the relative level of energy and water consumption in the selected P ackaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more display segments are Dispose of packaging in an visible, the higher the respective... -
Page 13: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 14: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 15: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 16: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx. -
Page 17: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 18: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 19: Levelling
Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement". -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 21: Transportation
Positioning and connecting Transportation E.g. when moving house Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can Before switching on the appliance prevent the appliance from working again: correctly, e.g. due to damage to the Notes electronics. -
Page 22: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door. -
Page 23: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Service flap Detergent drawer with illuminated displays for the i-Dos dispenser on the drawer handle... -
Page 24: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Buttons Appliance settings Note: (except for the main switch) and only (á 3 sec.) for changing the need to be pressed lightly. appliance settings, e.g. button signals, an overview of all selectable Main switch To switch the appliance on/off: settings that can be selected... -
Page 25: Display Panel
Getting to know the appliance The Remote start } button releases the appliance so that the programme can be started remotely via the Home Connect app. Remote start remains enabled for 24 hours after it has been activated. It is automatically deactivated if you do not start the programme via the Home Connect app during this... - Page 26 Getting to know the appliance Use the i-Dos button to select the Appliance settings (á 3 sec.) buttons dispenser and the dosage quantity selected Press the i-Dos button. Change the appliance setting: e.g. volume of the end signal ~ Page 54 Use the buttons below the two left-hand arrows to select the required dispenser, Using the buttons under the two left-...
-
Page 27: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 28 – Light: Do not prewash, select the P repare the laundry speedPerfect ( setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 28: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 29: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/instructions Settings Name of the programme Max. - Page 30 Overview of programmes Programme/type of laundry/instructions Settings Easy-Care Max. 4 kg Textiles made of synthetic materials or blended fabrics ¯ - 60 °C 0-1200** rpm ¦, (, ã, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Max.
- Page 31 Overview of programmes Programme/type of laundry/instructions Settings Super 15’/30’ * Max. 2 / 3,5 kg Extra-short programme of approx. 15 / 30 minutes, suitable for ¯ - 40 °C small items of lightly soiled laundry 0-1200** rpm The Super 15’ programme is run for the speedPerfect ( Note: .
- Page 32 Overview of programmes Programme/type of laundry/instructions Settings Shirts / Business Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or ¯ - 60 °C blended fabrics 0-800** rpm Notes ¦, (, ã, !, l, Ã, æ, õ, Shirts/blouses are only given a short spin on the ■...
- Page 33 Overview of programmes Programme/type of laundry/instructions Settings Rinse * Rinse Plus with spin 0-1600** rpm Ã, l, $, æ Detergent -, fabric softener è Spin * Extra spin with selectable speed 0-1600** rpm æ Detergent -, fabric softener - Drain * For the rinsing water, e.g.
-
Page 34: Starching
Overview of programmes Programme/type of laundry/instructions Settings Sport * Max. 2 kg Sportswear and leisurewear made from microfibre fabrics ¯-40 °C Notes 0-800** rpm Laundry must not be treated with fabric softener. ■ ¦, (, ã, !, l, Ã, æ, õ, Before washing, clean the detergent drawer thoroughly (manual ■... -
Page 35: Programme Default Settings
Programme default settings Ready in Programme default settings The programme duration is shown after selecting the programme. T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the main menu after Before starting the programme, you selecting the programme. -
Page 36: I-Dos Settings
Programme default settings i-Dos settings i-Dos i for fabric softener Dosage strengths Your washing machine has an intelligent dosing system for liquid detergent and High: high level of softness ª fabric softener (or detergent when using Medium: medium level of softness ©... -
Page 37: Additional Programme Settings/Options (* Depending On The Model)
Additional programme settings/options Prewash * Additional programme settings/options Settings that can be selected: (* depending on the on – off model) For heavily soiled laundry. T he settings/options that are available Notes A d d i t i o n a l p r o g r a m m e s e t t i n g s / o p t i o n s depend on the model. -
Page 38: Water Plus
Additional programme settings/options Water Plus * Press the Ü button after approx. 10 minutes. The laundry remains in the (¾) soaking solution. Leave the laundry to soak for as long Settings that can be selected: as required, then either press the Ü on –... -
Page 39: Stains
Additional programme settings/options Stains * The treatment of two stains explained in the following example: Blood In total, there are 16 different types of Blood is first “dissolved” in cold water, stain to choose from. then the selected wash programme starts. -
Page 40: Operating The Appliance
Operating the appliance The indicator lamp on the programme Operating the selector lights up and the main menu with the programme default settings appliance for the selected programme appear on the display panel: P reparing the washing O p e r a t i n g t h e a p p l i a n c e Temperature, machine ■... -
Page 41: Select Additional Programme
Operating the appliance Select additional programme settings By selecting additional settings/options, you can better adapt the washing process to your items of laundry. The settings can be selected or deselected depending on the progress of the programme. ~ Page 25 The ecoPerfect ¦... -
Page 42: Start The Programme
Operating the appliance Start the programme Note: Foam detection If Foam has been detected also Make sure that no items of laundry are appears on the display panel, the trapped between the door and the washing machine has detected too rubber seal, and close the door. -
Page 43: Adding Laundry
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the Ü button. To cool down laundry: Select Rinse. Press the Ü button to do this. Press the Ü... -
Page 44: Removing Laundry/Switching Off The Appliance
Operating the appliance Removing laundry/switching off the appliance Open the loading door and remove the laundry. Follow the information on the display panel. Press the # button. The appliance is switched off. Turn off the tap. Not required for AquaStop Note: models. -
Page 45: Intelligent Dosing System
Intelligent dosing system Notes Intelligent dosing Only use easy-pour liquid products ■ system that the manufacturer recommends adding to the detergent drawer. Do not mix different liquid I ntelligent dosing system in ■ detergents. If changing your liquid I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer detergent (type, manufacturer, etc.), empty the dispenser completely and... -
Page 46: Everyday Use
Intelligent dosing system When the appliance is switched on, the The dosage strength has been preset to following indicates that the detergent low (lightly soiled laundry) for drawer is closed completely: detergent ô and to medium (medium level of softness) for fabric softener i. It The corresponding illuminated ■... -
Page 47: Base Dosage
Intelligent dosing system Base dosage label. Take your water hardness into consideration when doing so. The basic dosages are: Select the basic fabric softener dosage according to how soft you would like For detergents – based on the your laundry to be. ■... -
Page 48: Manual Dosage
Intelligent dosing system The i-Dos ô dispenser is Caution! ■ automatically deactivated if Damage to the appliance detergent dosing is activated for the Cleaning agents and agents for i-Dos iIô dispenser. pretreating laundry (e.g. stain removers, The settings for this programme are prewash sprays, etc.) may cause saved until they are changed. -
Page 49: Home Connect
Home Connect Notes Home Connect Please observe the safety ■ precautions in this instruction T his appliance is Wi-Fi-capable and can manual and make sure that these H o m e C o n n e c t be remotely controlled using a mobile are complied with even when device. -
Page 50: Connecting To The Home Network And The Home Connect App
Home Connect Connecting to the home network and the Home Connect app Connect your appliance to the home network automatically or manually (you only need to do this the first time). Notes If your home network router has a ■ Activate the WPS function on your WPS function, you can connect the home network router within the next... - Page 51 Home Connect Connecting to the Home Connect app Step 3 If your appliance is connected to your home network, you can connect it to the Home Connect app. Ensure that you are in the Home Connect menu. ~ Page 49 Make sure that you have opened the Home Connect app and are logged in.
-
Page 52: Activating/Deactivating Wi-Fi
Home Connect Activating/deactivating Wi-Fi Resetting your network settings If your appliance is already connected to your home network, you can activate You can reset all of the network or deactivate Wi-Fi on your appliance. settings. Ensure that you are in the Home Ensure that you are in the Home Connect menu. -
Page 53: Information On Data Protection
Home Connect Ensure that the Home Connect Note: functions can be used only in conjunction with the Home Connect app. Information on data protection can be accessed in the Home Connect app. Declaration of Conformity BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality meets the The software update may take Note:... -
Page 54: Appliance Settings
Appliance settings Basic dosage: ■ Appliance settings i-Dos ô Basic 10 ml – 200 ml Y ou can change the following appliance Set the basic dosage in accordance A p p l i a n c e s e t t i n g s settings: with the recommendation of the detergent manufacturer. -
Page 55: Sensors
Sensors Dosing recommendation Sensors The dosing recommendation indicates a A utomatic load sensing recommended detergent dosage as a S e n s o r s percentage, depending on the selected Depending on the type of fabric and programme and the detected load. The load, the automatic load sensing indicated % refers to the dosing function optimally adjusts the water... -
Page 56: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 57: I-Dos Detergent Draw And Its Housing
Cleaning and maintenance i-Dos detergent draw and its The detergent drawer can be removed completely to allow you to housing clean to dispensers after you have emptied them. Emptying the dispensers: a) Empty the dispensers before The dispensers have emptying removing the drawer. -
Page 58: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance – Protect the rear drawer connector Turn off the water tap so that no against water, detergent or fabric- more water can flow in and has to be softener residue; if necessary, drained via the drain pump. clean the outer surfaces with a Switch off the appliance. -
Page 59: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Put the service flap back on, lock it Filter in the water supply into place and close it. blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the Ü... -
Page 60: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 61: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedy Top up the i-Dos iIô, ô The i-Dos dispensers are below the minimum fill level; top up ~ Page 45. container i-Dos iIô, i-Dos ô error; Set i-Dos iIô, i-Dos ô... -
Page 62: Faults And What To Do About Them
Faults and what to do about them. Display Cause/remedy Off: Wi-Fi is switched off and the appliance is not connected to your home network. Flashing: The appliance is trying to connect to your home network. Lit: Wi-Fi is switched on and the appliance is connected to your home network. - Page 63 Faults and what to do about them. Faults Cause/remedy The spin result is not Not a fault – the unbalanced load detection system has interrupted the ■ satisfactory. spin cycle because the laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. Laundry wet/too damp.
-
Page 64: After-Sales Service
After-sales service Faults Cause/remedy Loud noises, vibrations Is the appliance level? Level the appliance. ~ Page 19 ■ and machine "wandering" Are the appliance's feet secured? Secure the appliance's feet. ■ during the spin cycle. ~ Page 19 Have the transport locks been removed? Remove the transport locks. ■... -
Page 65: Consumption Rates
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption*... -
Page 66: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for cottons in accordance with Regulation (EU) no. 1015/2010 Programme + temperature Load Approximate programme... -
Page 67: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 68 Repair order and advice in the event of faults 0344 892 8999 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory.