Handling The Spare Wheel - Volvo V60 CROSS COUNTRY 2020 Owner's Manual

WHEELS AND TYRES
||
IMPORTANT
The car must not be driven with tyres of
different sizes or with a spare wheel other
than the one supplied with the car. Using
different-sized wheels can cause serious
damage to the car's transmission.
Related information
Changing wheel (p. 581)
•
Recommended tyre pressure (p. 576)
•
586

Handling the spare wheel*

Follow these instructions for handling the
spare wheel.
Taking out the spare wheel
The illustration is generic and appearance may differ.
The spare wheel is located under the cargo
area floor in the spare wheel well with the out-
side down. The spare wheel is secured with
the same bolt that attaches in the body. The
foam block contains all the tools for changing
a wheel.
1. Fold up the cargo area floor.
2. Undo the retaining screw.
3. Lift out the spare wheel.
Storing the punctured tyre
1. Screw back the mounting screw that held
the spare wheel in place.
IMPORTANT
Do not attempt to unscrew the lower part
of the mounting screw if it is secured in the
body. There is a risk it may break.
If the lower attachment of the mounting
screw does loosen from the body under-
neath the spare wheel, refit it in the hole
and turn clockwise to reattach it.
WARNING
For cars with 48V battery, the screw is
attached in the battery box instead of the
body. If the lower part of the mounting
screw remains fitted when the spare wheel
has been removed, it should be removed to
avoid risk of crushing when the damaged
tyre is put back in place.
2. Put the tools back in their right place in
the foam block.
3. Then fold down the cargo area floor and
place the punctured tyre in the cargo area.
* Option/accessory.