Resetting Settings In The Driver; Profiles - Volvo V60 CROSS COUNTRY 2020 Owner's Manual

DISPLAYS AND VOICE CONTROL
||
The active profile can then be linked to the
key.
1. Press Settings in the top view in the cen-
tre display.
2. Press System Driver
3. Select the desired profile. The display
returns to the home view. The
file cannot be linked to a key.
4. Drag down the top view again and tap on
Settings System
Edit Profile.
136
5. Select
the key. It is not possible to link a driver
profile to a different key than the one cur-
rently being used in the car. If there are
multiple keys in the car, the message
More than one key is found, put the key

Profiles.

you want to connect on backup reader
will be displayed.
Guest pro-
Driver Profiles
Backup reader's location in the tunnel console.
> When the message
to key
profile are linked.
6. Press
> This key is now linked to the driver pro-
file and will remain linked as long as the
Connect key
Related information
Driver profiles (p. 133)
•
Renaming a driver profile (p. 134)
•
Remote control key (p. 246)
•
Connect key to link the profile with
Profile connected
is shown, the key and the driver
OK .
box is not unticked.

Resetting settings in the driver

profiles
Settings that have been saved to one or more
driver profiles can be reset if the car is sta-
tionary.
NOTE
Factory reset is only possible when the
car is stationary.
1. Press Settings in the top view.
2. Press System Factory reset
Personal Settings.
3. Select one of the options Reset for the
active profile Reset for all profiles
,
Cancel .
Related information
Driver profiles (p. 133)
•
Resetting settings in the centre display
•
(p. 131)
Reset
or