Snooze Function; Canceling Alarms - Sangean HDR-1 User Manual

Snooze function

The alarm will sound at the selected alarm time. Press any button
except Power (Standby) button can be silence for 5 minutes interval
until alarm is on again (Snooze). This sequence can be repeated
during the alarm period.
Display will appear Snooze and remaining time to next alarm on.
Press Power button to cancel the Snooze.
Display backlight brightness control
1. Long press ATS/SET UP button until display appears SET UP and
flashing ATS.
2. Repeatedly press and release ATS/SET UP button to get Backlight.
3. Press Execution button to enter backlight control mode.
4. Press Tuning Up or Down button to adjust display brightness.
5. Press Execution button again to complete setting.
23
20070524_HDR-1_381QB0SB-A_GB.p65

Canceling alarms

The alarm will activate for 60 minutes (30 minutes for Beep alarm) until
you press Power button to cancel it.
2007/5/24, ¤U¤È 03:20
20