Table of Contents
Advertisement
TO TRIM SIDEBURNS AND FACIAL HAIR
•
Fit the detail blade.
•
Fit the desired detail blade comb over the detail blade.
•
Place the flat top of the comb against the skin and slowly slide the
trimmer through the hair.
•
Work upwards towards the ear and upper beard line.
•
Repeat from different directions as necessary.
•
Alternatively, hold the trimmer with the cutting blade facing you.
•
Use a small comb to lift the hairs.
•
Move the trimmer along the comb to cut the hairs. Use light pressure
and well controlled movements to trim hair.
CLEANING AND MAINTENANCE
•
To ensure long lasting performance of your hair clipper, clean the
blades and unit regularly.
•
Always keep the hair clipper in the provided storage pouch to avoid
damage to the blades.
•
Ensure the appliance is switched off and unplugged from the mains
before cleaning.
•
Do not use harsh or corrosive cleaners on the unit or blades.
•
Cleaning should be done with the cleaning brush provided.
•
After each use - brush the accumulated hair from the blades.
WASHABLE CLEANING
Note: Never rinse, wash or otherwise subject this product to liquid whilst
the power cord is connected.
•
The Rapid Cut Ultimate Hair Clipper is fully washable for easy cleaning,
the entire clipper may be held under running water.
•
Ensure the appliance is unplugged from the mains.
•
It is recommended that you rinse the hair off the blades after each
use. For best results, keep the clipper running while running it under
the tap.
•
Ensure the clipper is dry after cleaning.
•
For more thorough cleaning, the blade set can be easily removed
to wash any hair trimmings from the blades. To release the blade
set, push the removable blade cartridge outward and away from the
clipper by pushing on the thumb pad.
10
Advertisement
Table of Contents
