John Lewis Downton 803/06801 Manual page 4

Step by step assembly instructions
Step One
Firmly tighten 4 x Bolts (A) by hand into the Head End (01) and Foot End (04) as shown (2 into the
head end and 2 into the foot end) until they will not go in any further.
________________________________________________________________________
Step Two
Attach the centre support rail (08) onto the support brackets, push firmly downwards to secure in place.
Attach the middle support rail (05) onto the support brackets (02) and (03). Push firmly forward to
secure in place. Please adjust the side support legs to your floor level.
___________________________________________________________________________
4