Advertisement
Quick Links
Downton 135cm/150cm storage bed
Stock number: 803/06801 · 803/06901· 803/06804 · 803/06904 · 803/06603· 803/06604
Thank you for purchasing this Downton storage bed. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
For spare parts, please contact the TCH John Lewis helpdesk
On 01954 251 713
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
1
Advertisement
Related Manuals for John Lewis Downton 803/06801
Summary of Contents for John Lewis Downton 803/06801
- Page 1 Thank you for purchasing this Downton storage bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. For spare parts, please contact the TCH John Lewis helpdesk On 01954 251 713 Pre-assembly preparation...
- Page 2 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the number on the front of this assembly instruction.. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury or damage to the product.
- Page 3 1 x Head Drawer Front S. Panel Drawer 1 x Centre S. Panel support Foot 2 x Slats 1 x Middle Fittings support 14 x Fittings Bolts 12 x Wood Allen key Screws...
- Page 4 Step by step assembly instructions Step One Firmly tighten 4 x Bolts (A) by hand into the Head End (01) and Foot End (04) as shown (2 into the head end and 2 into the foot end) until they will not go in any further. ________________________________________________________________________ Step Two Attach the centre support rail (08) onto the support brackets, push firmly downwards to secure in place.
- Page 5 Step Three Screw all of the 12 (B) screws into predrilled holes. These screws tighten slats to bedframe. ___________________________________________________________________________ Step Four Drawer Fronts All fittings (C) must be screw into pre fitted cams of drawer fronts (06). _________________________________________________________________________...
- Page 6 Step Five Please attach drawer fronts (06) to drawers as shown per picture. If cams don’t lock into place please use screwdriver to adjust them. Tighten the drawer fronts (06) with a screw driver. Picture on page #6 _________________________________________________________________________ Step Six Gently push the drawers in their place.
-
Page 7: Care And Maintenance
It is recommended that before moving heavy objects to a new location they are completely disassembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. TCH John Lewis helpdesk on 01954 251 713 for queries regarding parts. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...