Panasonic DMR-ES15EB Service Manual page 29

Mode name
RTSC Return in XP AV1 input signal is encoded (XP),
decoded (XP) and output
decoded signal to external
(A & V)
without DISC recording and DISC
playback.
I/P Switch Switch Interlace and Progressive
in EE mode.
*Initial setting is "Interlace".
*This command is effective
during executing "White Picture
Output", "Magenta Picture
Output" and "RTSC Return in XP
(A & V)" modes.
Audio Mute Check whether mute is applied
(XTMUTE) normally by the timer
microprocessor.
Audio Mute Check whether mute is applied
(XDMUTE) normally by the Digital P.C.B..
Audio Pattern The audio pattern stored in the
Output internal memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching
operation of DAC can be
confirmed by sub command [2]
[4].
Laser Used Time Check laser used time (hours) of
Indiction drive.
Item
Description
FL display
Initial mode: EE2/ Interlace/
XP/ Audio 48kHz
Switch Interlace/
Progressive
Audio 44.1 kHz/ 48 kHz
Switch
Initial mode is Interlace
Switch Interlace/
Progressive
Initial mode (Audio 48kHz) Press [2] [3] in service
Audio 44.1kHz/48kHz
switching
(*****) is the used time
display in hour.
Laser used time of DVD
/ CD in Playback/
Recording mode is
counted.
29
Key operation
(Remote controller key)
Press [1] [3] in service
mode.
Press [1] [4] in RTSC
Return XP mode.
*I/P are switched
alternately.
Press [2] [4] in RTSC
Return XP mode.
*48 kHz / 44.1 kHz are
switched alternately.
Press [1] [4] in I/P Switch
mode.
*I/P are switched
alternately.
Press [2] [1] in service
mode.
Press [2] [2] in service
mode.
mode.
Press [2] [4] in Audio
Pattern Output mode.
*48 kHz / 44.1 kHz are
switched alternately.
Press [4] [1] in service
mode.