Figure 43. Disconnect the cable and remove the HPS board
Go to
https://support.lenovo.com/partslookup
replacement parts:
HPS camera
HPS board
Remove the sensor board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD unit" on page 45
"Remove the strip cover" on page 47
"Remove the hinge rubbers" on page 48
"Remove the LCD module" on page 49
Step 1.
Disconnect all cables and remove the sensor board.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
55