Information Tab - Emerson Control Techniques FM-4 Reference Manual

Information Tab

PowerTools Pro is designed to work with all releases of drive firmware. PowerTools Pro internally uses interface revisions
to negotiate and define the application to match the connected drive.
The first line shows the file name and user application for reference.
Drive Information Group
Firmware Part Number
Displays the part number of the drive firmware.
Firmware Revision
Displays the revision of the drive firmware.
Serial Number
Displays the serial number of the drive.
Base Interface Revision
This parameter displays the interface revision of the data parameter structure in the base drive. This revision has a correlati o n
with the features supported by the FM-4 module.
Module Information Group
Firmware Part Number
Displays the part number of the FM-4 firmware.
Firmware Revision
Displays the revision of the firmware in the FM-4 module.
Serial Number
Displays the serial number of the FM-4 module.
Registry Interface Revision
This parameter displays the interface revision of the "Registry" data parameter structure in the FM-4 module. This revision
has a correlation with the features supported by the module. On download, both the Registry and Base Interface revisions are
used to convert the Power Tools data set to match the module's data structure. In this way Power Tools can support different
releases of the FM-4 Flash files. For the most part the user does not need to be concerned over interface revisions.
Setting Up Parameters
31