Preface; Signal & Symbol Definitions - True GDM-26-HC~TSL01 Installation Manual

Preface

The warning, guidelines, and recommendations within this document are meant to prevent appliance damage, injury, or death. Please
carefully read all warnings, guidelines, and recommendations before proceeding to ensure the continued safe use and maintenance of
your TRUE appliance.
Signal & Symbol Definitions
Below are symbols you may see in this document. Some symbols may not appear.
DANGER!
WARNING!
CAUTION!
USER ACTION!
NOTICE!
Safety Symbols
Safety alert; alerts reader to potential physical
injury hazards. Obey all safety messages following
this symbol to avoid possible injury or death.
Flammable material; fire hazard.
Electrical shock
Tipping hazard; tip-over hazard.
Sharp element; cut or sever hazard.
Eye hazard; risk of eye injury.
Exploding pressurized cylinder
Slippery surface
Crush or cut
TEC_TM_105 | REV. D | EN
GDM FREEZER / REFRIGERATOR
Signal Word Definitions
An imminently hazardous situation which, if not avoided, will result in serious injury or death.
A potentially hazardous situation which, if not avoided, can result in serious injury or death.
A potentially hazardous situation which, if not avoided, may result in minor or moderate injury;
an unsafe practice.
User action alert, follow all recommendations to avoid appliance or product damage.
Important information not related to hazards or risk of personal injury.
hazard.
hazard.
hazard.
hazard.
Additional Symbols
Mandatory action alert
to required or recommended actions. Obey all
messages and recommendations following this
symbol to avoid appliance or product damage.
Important information
NOTICE ›
risk of personal injury.
Review and understand
before installing, operating, or servicing.
Wear eye
Wear protective
Secure gas cylinders
DO NOT
DO NOT
DO NOT
05/16/2023
symbol; alerts reader
not related to hazards or
the installation manual
protection.
gloves.
to prevent falling cylinders.
use extension cord.
use adaptor plugs.
dispose of with other household waste.
truemfg.com
Page 3 of 40