Program Function - Samsung Z-300S Owner's Instructions Manual

Z-300S-2 5/12/03 10:06

PROGRAM FUNCTION

• This function can program up to 30 tracks during STOP mode.
ex) To program No.4 track of No.2 disc
1
Press the PROGRAM button.
•
"PROGRAM" lights on the display section.
PROGRAM
GAME
2
Select the disc by pressing the
DISC CHANGE button.
•
Press the DISC CHANGE button.
Disc Change
(SET)
3
Press the track number to
be programmed.
•
Press the digit buttons.
Ex) Select track 4
4
18
Page 18
PROGRAM 01 1 - 00
DISC CHANGE
(REMOTE CONTROL)
PROGRAM 01 2 - 04
4
In a second
• After step 3, you must press the PROGRAM
button again then the selected number (2-04)
is programed.
• Up to 30 tracks can be programmed by
repeating step 2 to 4.
PROGRAM
GAME
5
Press the PLAY/PAUSE button.
•
Programming is completed, and the first track of
the program is played.
•
When the PREV/NEXT button is pressed, the next
or previous programmed track is played.
PROGRAM 01 1 - 00
Note
• If the Program button is pressed during programming,
it can not be programmed anymore, press again to
continue.
• "PROGRAM" will light on the display section after
programming is completed during the play.
• If the Open/Close button is pressed during playing,
this function will do not work.
PROGRAM 02 1 - 00
SELECT
PROGRAM No
Disc No
Track No