Program Function; To Confirm The Program; To Change The Program; To Cancel The Program Mode - Samsung CD YEPP MCD-HM200H Instruction Manual

Program function

You can store up to 30 tracks of your favorite tunes.
Example: When storing track number 4 to program number 1.
1
In the stop mode, press the
PROG./NAVI. button.
• When playing an MP3(WMA)-CD,
press and hold the NAVI/PROG
button in the stop mode.
2
Using Iî or ïI button,
select the desired track.
3
Press the PROG./NAVI. button.
• Track number 4 is stored under
program number 1 and you will
be taken to program number 2.
• Continue to program the desired
tracks.
4
Press the Play/Pause ( √» )
button when programming
is complete.
To stop program playback
• Press the Stop ( ) button.
• The total number of programmed tracks as well as the total number of tracks in a given
27 disk will be shown on the display.
• Press the Play/Pause ( √» ) button to resume program playback.
normal
esp Flat
In the stop mode, press the
•
P : 01 Tr : - - -
PROG./NAVI. button.
• Each time the button is pressed, track
numbers will be shown on the display
according to their program sequence.
normal
esp Flat
P : 01 Tr : 004
• To change the programmed tracks during program
confirmation, use Iî or ïI to select the track to
change.
normal esp Flat Press the PROG./NAVI. button to add new tracks.
•
P : 02 Tr : 006
• Press the Stop ( ) button twice.
normal esp Flat
The Program mode will also be canceled if the
•
P01 04 00 : 52
lid opens during programming.
CDDA Disc

To confirm the program

To change the program

To cancel the program mode

Warning
•
During programming, if no action is performed for about 15 seconds,
the player will automatically turn itself off to conserve battery power
consumption.
normal
esp Flat
P : 01 Tr : 004
28