Procedure For Tilting Up - Yamaha F20A Owner's Manual

Operation
3. Place the tilt lock lever (if equipped) in
the release/up position.
4. Pull up the shallow water lever (if
equipped).
5. Hold the rear of the top cowling with one
hand and tilt the engine up fully.
6. Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
the lock position automatically.
34
EMU28005

Procedure for tilting up

Power trim and tilt models / power tilt models
1. Place the remote control lever / the gear
shift lever in neutral.
ZMU02302
2. Disconnect the fuel line from the out-
board motor or close the fuel cock.
ZMU02305
3. Press the power trim and tilt switch /
power tilt switch "
board motor has tilted up completely.
ZMU02292
ZMU02302
" (up) until the out-