Operation
er operation before starting the engine.
The controls should work smoothly, with-
G
out binding or unusual free play.
Look for loose or damaged connections.
G
Check operation of the starter and stop
G
switches when the outboard motor is in the
water.
EMU27140
Engine
Check the engine and engine mounting.
G
Look for loose or damaged fasteners.
G
Check the propeller for damage.
G
EMU27163
Checking the engine oil level
1.
Put the outboard motor in an upright po-
sition (not tilted).
2.
Remove oil dipstick and wipe it clean.
3.
Completely insert the dipstick and re-
move it again.
4.
Check the oil level using the dipstick to
be sure the level falls between the upper
and lower marks. Fill with oil if it is below
the lower mark, or drain to the specified
level if it is above the upper mark.
1. Oil dipstick
22
1. Lower level mark
2. Oil dipstick
3. Upper level mark
NOTE:
Be sure to completely insert the dipstick into
the dipstick guide.
EMU27441
EWM00060
Gasoline and its vapors are highly flam-
mable and explosive. Keep away from
sparks, cigarettes, flames, or other
sources of ignition.
1
ZMU02833
1.
Remove the fuel tank cap.
2.
Fill the fuel tank carefully.
3.
Close the cap securely after refueling.
1
3
2
Filling fuel
WARNING
ZMU02082
ZMU04047