Cleaning And Maintenance - Remington S2 Silky Series Use & Care Manual

FOR BEST SHAVING PERFORMANCE
We recommend that you use your new shaver daily for two or three weeks
to allow time to find the optimum shaving methods for your particular type
of hair growth patterns.
Caution:
If your skin is easily irritated by shaving, or you suffer from skin allergies,
you should test a section of your arm or leg before using the shaver.
Note: Rinse only with cool or warm water, not hot water. Do not rinse with
water hotter than 70°C.
CLEANING & MAINTENANCE
Care For Your Shaver
To ensure long lasting performance of your shaver, clean the head
assembly regularly. The easiest and the most hygienic way to clean the
shaver is by rinsing the shaving head after use with warm water. Always
keep the protective headguard on the shaving head when the shaver is not
in use.
After Each Use
1.
Ensure the shaver is turned off.
2.
Press the release buttons to open the shaver head.
3.
Blow on the foils to remove any loose debris.
4.
Brush or rinse the accumulated hair from the main body of the shaver,
shaving head and cutter assembly.
5.
Leave the head assembly open to let the shaver dry completely.
6.
Return the shaving head to its original position and snap in place.
Note:
• Ensure that the shaver is turned off when cleaning.
• Do not clean the shaving foils with the brush.
• At regular intervals, put a drop of sewing machine oil onto the foils and
cutters heads.
7